SAFE STEP 200

High performance, two-part, epoxy anti-slip floor coating designed for application in areas of heavy vehicular traffic.

  • High performance safety coating is easy to apply and offers optimum adhesion and slip resistance to metal, concrete and timber surfaces.
  • Ideal applications include loading bays, vehicular ramps and all areas subject to heavy traffic.
  • Can be applied to any clean, dry surface by hard roller, trowel or spray.
  • Resists most acids, alkalis, solvents, grease, oils and salt water.

Product information

Concrete should be at least 28 days old (applying a coating onto concrete less than 28 days old could cause failure of the product).

All oils, grease, dirt, etc. must be removed using a suitable solvent or aqueous de-greaser solution.

All old coatings must be removed (this can be achieved by grit/shot blasting, scabbling or scarifying).

If the surface is not sufficiently rough to ensure a suitable key or where the surface of the concrete is weak the concrete must be etched using a suitable acid etch system if grit/shot blasting cannot be used.

Porous surfaces such as concrete and wood should be primed using SAFE STEP® Non-Metal Primer to seal the surface (metal surfaces should be primed using SAFE STEP® Primer).

Industries


  • Construction
  • Maintenance
  • Marine
  • Rail
  • Warehousing & Logistics

Part Codes

  • Size: 5 litre Grey
    Part Number: 43320
  • Size: 5 litre Yellow
    Part Number: 43322

Related Products

Go to all products

Copyright © ROCOL 2021 - All rights reserved.