Single pack, general purpose anti-slip floor coating recommended for large areas where a low profile anti-slip surface is required
Apply to clean, dry surfaces only.
Remove all paint, rust and mill scale, preferably by grit-blasting.
Remove oil, dirt, wax by dissolving in a water washable cleaner/degreaser.
All surfaces must be completely dry before application.
Porous surfaces such as concrete and wood should be primed using SAFE STEP® Non Metal Primer to seal the surface.
Metal surfaces should be primed with SAFE STEP® Metal Primer.
New concrete should be allowed to cure for a minimum of 28 days before coating.
Single pack, epoxy ester anti-slip floor coating designed for application in areas of heavy pedestri...
High performance, two-part, epoxy anti-slip floor coating designed for application in areas of heavy...